Description
Dell PowerEdge R930 Server – Specifications
PROCESSOR – 4 SOCKET
- Intel® Xeon® processor 5500 and 5600 series
- 24-core Intel® Xeon®
- Quad-core Intel® Xeon®
OPERATING SYSTEM
-
- Microsoft® Windows Server® 2022
Virtualization options:
- Citrix® XenServer®
- Microsoft Hyper-V through Microsoft Windows Server 2008
- VMware® vSphere® ESX™ and ESXi™
- Red Hat Enterprise Virtualization®
CHIPSET
- Intel® 5520 (Tylersberg)
MEMORY
-
- Up to 192GB
-
- Up to 1333MT/s DDR3
- Has 64GB Ram
EMBEDDED HYPERVISOR (OPTIONAL)
- Citrix XenServer
- Microsoft Hyper-V through Microsoft Windows Server 2008
- VMware vSphere ESX and ESXi
STORAGE
-
- Hot-plug Hard Drive Options:
-
- 2.5” SAS SSD, SATA SSD, SAS (10K, 15K), nearline SAS (7.2K), SATA (7.2K)
Maximum Internal Storage:
- Up to 12TB
DRIVE BAYS
-
- Hot-Swap options available:
- Up to six 2.5” SAS, SATA or SSD drives
SLOTS
-
- 2 PCIe G2 slots + 1 storage slot:
- Two x8 PCIe Gen2 slots
- One x4 PCIe Gen1 slot dedicated for the integrated storage controller card
RAID CONTROLLER
-
- Internal:
-
- PERC H200 (6Gb/s)
- PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1GB Non-Volatile battery-backed cache
- SAS 6/iR
- PERC 6/i with 256MB battery-backed cache
External:
-
- PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1GB Non-Volatile battery-backed cache
- PERC 6/E with 256MB or 512MB of battery-backed cache
External HBAs (non-RAID):
- 6Gbps SAS HBA
- SAS 5/E HBA
- LSI2032 PCIe SCSI HBA
NETWORK CONTROLLER
-
- Two dual port embedded Broadcom® NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing.
- Optional 1GBe and 10GBe add-in NICs
COMMUNICATIONS
-
- Optional add-in NICs:
-
- Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
- Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4
- Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x4
- Intel 10GBase-T Copper Single Port NIC, PCI-E x8
- Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8
- Broadcom® BMC57710 10Base-T Cooper Single Port NIC, PCI-E x8
- Broadcom® BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4
- Broadcom® BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4
- Broadcom® NetXtreme® II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload
- Intel® Gigabit ET Dual Port Server Adapter
- Intel® Gigabit ET Quad Port Server Adapter
- Broadcom 10GbE NIC, Broadcom Dual Port 10GbE SFP+
- Brocade® CNA Dual-port adapter
- Emulex® CNA iSCSI HBA stand up adapter OCE10102-IX-D
- Emulex® CNA iSCSI HBA stand up adapter OCE10102-FX-D
Optional add in HBAs:
- Qlogic® QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA
- Qlogic® QLE 220 FC4 Single Port 4 Gbps Fiber Channel HBA
- Qlogic® QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA
- Qlogic® QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4
- Qlogic® QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4
- Emulex® LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4
- Emulex® LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4
- Emulex® LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4
- Emulex® LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4
- Brocade® FC4 and 8 GB HBAs
POWER
- Two hot plug high efficient 502w PSU (Energy Smart)
- Two hot-plug 717W PSUs (High Output)
AVAILABILITY
- Hot-plug hard drives
- Hot-plug redundant power
- Redundant cooling
- ECC memory
- Single Device Data Correction (SDDC)
- Supports memory demand
- Patrol scrubbing
- High availability failover cluster
GRAPHICS CARD
- Integrated Matrox G200, 8 MB shared video memory
CHASSIS
-
- 1-U Rack
-
- Height: 4.26cm (1.68”)
-
- Width: 48.24cm (18.99”) (includes rack latches)
-
- Depth: 77.2cm (30.39”) (includes PSU handles and bezel)
- Weight (maximum config): 17.69Kgs (39lbs)
MANAGEMENT
- Dell™ OpenManage™
- Lifecycle Controller
- iDRAC6 Enterprise (Optional)
- vFlash (Optional)
RACK SUPPORT
-
- ReadyRails™ sliding rails for 4-post Racks:
-
- Support tool-less installation in 19” EIA-310-E compliant square or unthreaded round hole 4-post racks including all Dell 42xx & 24xx racks
-
- NOTE: Threaded 4-post racks require the static ReadyRails™ kit or 3rd party conversion kits available through Dell Software & Peripherals
-
- Support full extension of the system out of the rack to allow serviceability of key internal components
-
- Support optional cable management arm (CMA) except on Dell 4200 & 2400 racks and 3rd party racks that are less than 1m in depth
-
- Rail depth without the CMA: 798 mm (with outer CMA brackets attached), 768 mm (with outer CMA brackets removed)
-
- Rail depth with the CMA: 887 mm
-
- Square-hole rack adjustment range: 692-756 mm
-
- Round-hole rack adjustment range: 678-749 mm
ReadyRails™ static rails for 4-post & 2-post Racks:
-
- Support tool-less installation in 19” EIA-310-E compliant square or unthreaded round hole 4-post racks including all Dell 42xx & 24xx racks
-
- Support tooled installation in 19” EIA-310-E compliant threaded hole 4-post and 2-post racks
-
- Rail depth: 608 mm
-
- Square-hole rack adjustment range: 588-828 mm
-
- Round-hole rack adjustment range: 574-821 mm
-
- Threaded-hole rack adjustment range: 592-846 mm
- 1U/2U Rail Attachment Brackets
Reviews
There are no reviews yet.